First, I removed the microwave and snaked a coat hanger over the fridge and through the hole for the antenna panel.

Then I taped a 12 foot coax to the hanger and pulled the coax back though the hole to the microwave cabinet.

The antenna panel has a connection for a second tv (plus the sat connection that is not hooked to anything) so I connected the coax to the "set2" connection and reinstalled the panel.

Now with one end connected, I ran the coax along the outside wall in the top of the cabinets to the radio and connected the coax to a 300ohm coax to terminal connector. We now get GREAT radio reception.

After installing the radio back to the cabinet, I pulled the remaining (about 2 feet) cable back though the cabinets and pushed it into the space above the fridge. Add a couple cable holders along the top wall to hold the cable up and out of the way, and all is done.
Guess if we ever want to add a second tv to the trailer I will have to rethink this but I am not sure where we would put another tv!
No comments:
Post a Comment